WatertightHub
Aurora, IL

French Drain Installation Cost in Aurora

$1,600$6,350

Average french drain installation cost in Aurora · avg $4,000

  • Updated 2026
  • 12 local pros
  • Based on local project data
At a glance · Aurora
Typical timeline
1–2 days
Permit
Usually required · ~$170
Local soil
silty clay and glacial till
Freeze-thaw cycles
58 / yr
Local pros
12 available

French Drain Installation cost in Aurora, IL

Perimeter drainage that channels groundwater away from the foundation before it gets in. Below is how it compares with related foundation and drainage work in Aurora.

Service in AuroraLowAverageHigh
Basement Waterproofing$2,450$5,100$7,750
Foundation Repair$2,350$5,500$8,600
Crawl Space Encapsulation$3,200$5,850$8,500
French Drain InstallationThis page$1,600$4,000$6,350
Sump Pump Installation$700$1,550$2,350

Ranges reflect local labor and silty clay and glacial till soil conditions. Your quote depends on square footage, access, and severity.

What affects the cost in Aurora

Annual rainfall
41"
Freeze-thaw cycles / yr
58
Frost depth
38"

Compact till soils around Aurora shed water poorly, so rain and snowmelt pool against the foundation, then hard freezes (to about 38" deep) widen any crack they find.

Permits in Aurora

Underpinning, piering, and wall stabilization need a permit (often with an engineer's letter); small interior repairs typically do not.

Issuing authority: City of Aurora Permits & Inspections Office · typical fee ~$170

Get matched with french drain installation pros in Aurora

12 established french drain installation companies serve the Aurora area. Tell us about your project and compare free quotes, no obligation.

  • Local, established contractors
  • Compare multiple quotes in one place
  • Free, with no obligation

French Drain Installation in Aurora: FAQ

How much does french drain installation cost in Aurora?+

In Aurora, french drain installation typically runs $1,600–$6,350, averaging about $4,000. The silty clay and glacial till soil and 58 freeze-thaw cycles a year are the biggest local price drivers.

Do I need a permit for french drain installation in Aurora?+

Underpinning, piering, and wall stabilization need a permit (often with an engineer's letter); small interior repairs typically do not. Permits are handled by City of Aurora Permits & Inspections Office, with a typical fee around $170.

Is french drain installation worth it in Aurora?+

With 41" of annual rainfall and a 38" frost depth, untreated water intrusion in Aurora tends to worsen each freeze-thaw season, so most homeowners find addressing it early is far cheaper than structural repair later.