WatertightHub
Aurora, IL

Sump Pump Installation Cost in Aurora

$700 – $2,350

Average sump pump installation cost in Aurora · avg $1,550

  • Updated 2026
  • 12 local pros
  • Based on local project data
Get free estimatesSee cost breakdown ↓
At a glance · Aurora
Typical timeline
Under 1 day
Permit
Usually required · ~$170
Local soil
silty clay and glacial till
Freeze-thaw cycles
58 / yr
Local pros
12 available

Sump Pump Installation cost in Aurora, IL

Pump systems that evacuate collected water from a basement or crawl space pit. Below is how it compares with related foundation and drainage work in Aurora.

Service in AuroraLowAverageHigh
Basement Waterproofing$2,450$5,100$7,750
Foundation Repair$2,350$5,500$8,600
Crawl Space Encapsulation$3,200$5,850$8,500
French Drain Installation$1,600$4,000$6,350
Sump Pump InstallationThis page$700$1,550$2,350

Ranges reflect local labor and silty clay and glacial till soil conditions. Your quote depends on square footage, access, and severity.

What affects the cost in Aurora

Annual rainfall
41"
Freeze-thaw cycles / yr
58
Frost depth
38"

Compact till soils around Aurora shed water poorly, so rain and snowmelt pool against the foundation, then hard freezes (to about 38" deep) widen any crack they find.

Permits in Aurora

Underpinning, piering, and wall stabilization need a permit (often with an engineer's letter); small interior repairs typically do not.

Issuing authority: City of Aurora Permits & Inspections Office · typical fee ~$170

Get matched with sump pump installation pros in Aurora

12 established sump pump installation companies serve the Aurora area. Tell us about your project and compare free quotes, no obligation.

  • Local, established contractors
  • Compare multiple quotes in one place
  • Free, with no obligation

Sump Pump Installation in Aurora: FAQ

How much does sump pump installation cost in Aurora?+

In Aurora, sump pump installation typically runs $700–$2,350, averaging about $1,550. The silty clay and glacial till soil and 58 freeze-thaw cycles a year are the biggest local price drivers.

Do I need a permit for sump pump installation in Aurora?+

Underpinning, piering, and wall stabilization need a permit (often with an engineer's letter); small interior repairs typically do not. Permits are handled by City of Aurora Permits & Inspections Office, with a typical fee around $170.

Is sump pump installation worth it in Aurora?+

With 41" of annual rainfall and a 38" frost depth, untreated water intrusion in Aurora tends to worsen each freeze-thaw season, so most homeowners find addressing it early is far cheaper than structural repair later.