WatertightHub
Wilkes-Barre, PA

Sump Pump Installation Cost in Wilkes-Barre

$700 – $2,400

Average sump pump installation cost in Wilkes-Barre · avg $1,550

  • Updated 2026
  • 12 local pros
  • Based on local project data
Get free estimatesSee cost breakdown ↓
At a glance · Wilkes-Barre
Typical timeline
Under 1 day
Permit
Usually required · ~$170
Local soil
clay and shale-derived soil
Freeze-thaw cycles
59 / yr
Local pros
12 available

Sump Pump Installation cost in Wilkes-Barre, PA

Pump systems that evacuate collected water from a basement or crawl space pit. Below is how it compares with related foundation and drainage work in Wilkes-Barre.

Service in Wilkes-BarreLowAverageHigh
Basement Waterproofing$2,400$5,200$7,950
Foundation Repair$2,300$5,600$8,850
Crawl Space Encapsulation$3,150$5,950$8,750
French Drain Installation$1,600$4,100$6,550
Sump Pump InstallationThis page$700$1,550$2,400

Ranges reflect local labor and clay and shale-derived soil soil conditions. Your quote depends on square footage, access, and severity.

What affects the cost in Wilkes-Barre

Annual rainfall
45"
Freeze-thaw cycles / yr
59
Frost depth
37"

Around Wilkes-Barre, dense clay soils trap groundwater beside the foundation, and seasonal freeze-thaw movement keeps opening new paths for water to seep in.

Permits in Wilkes-Barre

Underpinning, piering, and wall stabilization need a permit (often with an engineer's letter); small interior repairs typically do not.

Issuing authority: City of Wilkes-Barre Department of Buildings · typical fee ~$170

Get matched with sump pump installation pros in Wilkes-Barre

12 established sump pump installation companies serve the Wilkes-Barre area. Tell us about your project and compare free quotes, no obligation.

  • Local, established contractors
  • Compare multiple quotes in one place
  • Free, with no obligation

Sump Pump Installation in Wilkes-Barre: FAQ

How much does sump pump installation cost in Wilkes-Barre?+

In Wilkes-Barre, sump pump installation typically runs $700–$2,400, averaging about $1,550. The clay and shale-derived soil soil and 59 freeze-thaw cycles a year are the biggest local price drivers.

Do I need a permit for sump pump installation in Wilkes-Barre?+

Underpinning, piering, and wall stabilization need a permit (often with an engineer's letter); small interior repairs typically do not. Permits are handled by City of Wilkes-Barre Department of Buildings, with a typical fee around $170.

Is sump pump installation worth it in Wilkes-Barre?+

With 45" of annual rainfall and a 37" frost depth, untreated water intrusion in Wilkes-Barre tends to worsen each freeze-thaw season, so most homeowners find addressing it early is far cheaper than structural repair later.