WatertightHub
Appleton, WI

Sump Pump Installation Cost in Appleton

$650 – $2,300

Average sump pump installation cost in Appleton · avg $1,500

  • Updated 2026
  • 12 local pros
  • Based on local project data
Get free estimatesSee cost breakdown ↓
At a glance · Appleton
Typical timeline
Under 1 day
Permit
Usually required · ~$160
Local soil
glacial till
Freeze-thaw cycles
47 / yr
Local pros
12 available

Sump Pump Installation cost in Appleton, WI

Pump systems that evacuate collected water from a basement or crawl space pit. Below is how it compares with related foundation and drainage work in Appleton.

Service in AppletonLowAverageHigh
Basement Waterproofing$2,300$4,950$7,600
Foundation Repair$2,200$5,300$8,400
Crawl Space Encapsulation$2,950$5,650$8,300
French Drain Installation$1,500$3,900$6,250
Sump Pump InstallationThis page$650$1,500$2,300

Ranges reflect local labor and glacial till soil conditions. Your quote depends on square footage, access, and severity.

What affects the cost in Appleton

Annual rainfall
34"
Freeze-thaw cycles / yr
47
Frost depth
50"

Compact till soils around Appleton shed water poorly, so rain and snowmelt pool against the foundation, then hard freezes (to about 50" deep) widen any crack they find.

Permits in Appleton

Underpinning, piering, and wall stabilization need a permit (often with an engineer's letter); small interior repairs typically do not.

Issuing authority: City of Appleton Permits & Inspections Office · typical fee ~$160

Get matched with sump pump installation pros in Appleton

12 established sump pump installation companies serve the Appleton area. Tell us about your project and compare free quotes, no obligation.

  • Local, established contractors
  • Compare multiple quotes in one place
  • Free, with no obligation

Sump Pump Installation in Appleton: FAQ

How much does sump pump installation cost in Appleton?+

In Appleton, sump pump installation typically runs $650–$2,300, averaging about $1,500. The glacial till soil and 47 freeze-thaw cycles a year are the biggest local price drivers.

Do I need a permit for sump pump installation in Appleton?+

Underpinning, piering, and wall stabilization need a permit (often with an engineer's letter); small interior repairs typically do not. Permits are handled by City of Appleton Permits & Inspections Office, with a typical fee around $160.

Is sump pump installation worth it in Appleton?+

With 34" of annual rainfall and a 50" frost depth, untreated water intrusion in Appleton tends to worsen each freeze-thaw season, so most homeowners find addressing it early is far cheaper than structural repair later.